Hydraulics & Pneumatics

Hydraulics & Pneumatics

NYLON 12 TUBE RANGE

Nylon12 is a very stable material, giving excellent resistance to chemicals and oils and it has an extremely high abrasion resistance. Its molecular structure makes it very tough and durable and therefore an obvious choice in the Hydraulics & pneumatics industry.

PROPERTIES OF NYLON

  • Very good physical properties
  • Moisture has significant effect on properties
  • Very good heat resistance
  • Excellent chemical resistance
  • Excellent wear resistance
  • Suitable for ‘push fit’ fittings & pneumatic control systems
  • Available in Natural, Black, Red, Green, Blue & Yellow
 
O/D (mm) I/D (mm) PSI COIL LENGTH
4.0mm 2.5mm 400 30m/100m
5.0mm 3.0mm 400 30m/100m
6.0mm 4.0mm 350 30m/100m
8.0mm 6.0mm 350 30m/100m
8.0mm 5.5mm 350 30m
9.0mm 6.0mm 300 30m
10.0mm 7.0mm 300 30m
10.0mm 8.0mm 220 30m/100mm
11.0mm 8.0mm 200 30m
12.0mm 9.0mm 250 30m
12.0mm 10.0mm 200

30m

 

 

TECHNICAL INFORMATION

  • Temperatures: -35°C to +70°C. Occasional use up to 120°C. Brittle point: -70°C. *
  • Manufactured from prime engineering materials, which conform to RoHS & WEEE Directives
  • Produced to exacting tolerances
  • Tolerances conform with BS5409 Parts 1 or 2
  • Dimensional tolerances and raw materials conform with SAEJ844 3A (Un-reinforced) & DIN 73378/DIN 74324-1)
  • Remarkably stable
  • Excellent mechanical strength
  • Good durability when used at a wide range of temperatures and pressures
  • Resistant to the crushing, cracking, abrasion and work hardening associated with the vibration of machinery
  • Good resistance to a wide range of chemicals
  • The material is heat and light stabilised making it ideal for a variety of outdoor uses
  • Lightweight
  • Very flexible
  • Good bend radii
  • Suitable with both the latest push-on fittings and the more conventional compression fittings.
 
PNEUMATIC POLYURETHANE TUBE
 
O/D (mm) I/D (mm) PSI COIL LENGTH
4.0mm 2.5mm 400 30m/100m
5.0mm 3.0mm 400 30m/100m
6.0mm 4.0mm 350 30m/100m
8.0mm 6.0mm 350 30m/100m
8.0mm 5.5mm 350 30m
9.0mm 6.0mm 300 30m
10.0mm 7.0mm 300 30m
10.0mm 8.0mm 220 30m
11.0mm 8.0mm 200 30m
12.0mm 9.0mm 250 30m
12.0mm 10.0mm 200 30m

Technical Information

  • Temperatures: -50°C to +80°C. Occasional use up to 100°C. 
  • Used in pneumatic control systems where flexibility and ease of handling are required
  • Remains extremely flexible even at low temperatures
  • Wide operating temperature range
  • Excellent resistance to kinks and flattening and gives a minimum kink memory
  • Produced without the use of plasticisers, so it will not work harden with use
  • Excellent resistance to abrasions, most gases, many solvents, petrol and other hydrocarbons
  • Designed to operate with a range of the most popular push-fit connectors
  • Available in Natural, Black, Red, Green, Blue & Yellow

 

Looking for a small quantity? Buy online now at www.transamshop.co.uk